ITS - Drilling Services

The Aberlan Variable High Pressure Wash Unit will provide a continuous high output of water or base oil to tackle the full range of washdown jobs around the rig, from cleaning down the pit room or drill room floor to ensuring optimum shale shaker screen performance.

The Variable High Pressure Wash Unit has been designed to offer several significant advantages:

small and easily portable, it can be carried into confined spaces
air driven, can be safely operated in hazardous areas
the robust stainless steel frame protects against impact damage
the principle of operation ensures a high degree of reliability and efficiency.

The robust stainless steel frame (fitted with carrying handles) houses the pump unit itself, together with the air filter, regulator and lubricator set which conditions the air supply to the pump. The high pressure output from the pump is controlled by a pulsation dampener which removes pressure surges and ensures a steady output pressure from the unit.

Performance Data:

air driven 35:1 ratio hydraulic pump
dead end output pressure at pump of 2500-3500 psi (dependant upon nozzle selection)
continuous output pressure at lance of:
1 with 1502 nozzle 2900 psi @ 6.5 litres/min
2 with 1503 nozzle 2500 psi @ 9.0 litres/min
2 with 1504 nozzle 1700 psi @ 11.0 litres/min
Can be used with water or base oil

NOTE: unit is not self priming, therefore, base oil must be gravity fed.

Specifications and Dimensions:

Weight: 42kg
Total Weight (including hoses/accessories): 60kg
Height: 40cm
Width: 48cm
Length: 68cm

Supplied Complete with:

50 feet of 1 inch air supply hose c/w fittings
50 feet of 3/8 inch HP jetting hose c/w fittings
Lance Gun Assembly
1 copy of the operating manual/parts list

Air Consumption:

The unit requires a supply of rig air at between 90-125 psi (6.2-8.6 bar)